Skip to main content
numora.
numora.

Hair Developer Mixing Calculator: Mix the Right Ratio

Developer volume for any mixing ratio

BeautyByΒ Numora Beauty TeamNot yet reviewed

Try the calculator

Math runs in your browser. No sign-up.

Assumptions
oz
Developer needed
60

Grams, for one application.

60oz g of colour needs 60 g of developer, giving 120 g of mixture.

Total mixture120
Total colour for all applications60
Total developer for all applications60
Embed this calculator on your own site β€” drop in a one-line iframe.
Quick takeaway

Hair colour is mixed with developer at a ratio set by the manufacturer, most commonly 1:1 for permanent colour, 1:1.5 for some lifting formulas and 1:2 for high-lift and bleach. Getting the ratio right matters more than most people expect: too little developer leaves the mixture thick and poorly saturated, while too much dilutes the pigment and weakens deposit. This calculator converts a colour quantity into the developer needed and the total mixture produced, so you can check whether one tube covers the hair you are working with. Developer volume β€” 10, 20, 30 or 40 β€” is a separate choice from the ratio, governing lift rather than quantity.

What is a hair developer mixing?

Work out how much developer to combine with hair colour at standard 1:1, 1:1.5 and 1:2 ratios, and how much total mixture that produces. Ratios are specified by weight, not volume, because colour and developer differ in density. Developer volume β€” 10, 20, 30 or 40 β€” is a separate decision governing lift rather than quantity, and the two are frequently confused. Always follow the manufacturer's instructions for the specific product.

The formula

developer = colour Γ— ratio parts; total mixture = colour + developer

Source: Manufacturer mixing ratios by weight.

Worked examples

1A standard permanent colour application

Inputs
colourAmount: 60ratioDeveloper: 1applications: 1
Walkthrough

One 60 g tube at 1:1 takes 60 g of developer for 120 g of mixture β€” comfortably enough for short to mid-length hair. For shoulder-length hair, mixing one and a half tubes with 90 g of developer avoids running short partway through, which is what produces banding.

2High-lift colour for two applications

Inputs
colourAmount: 50ratioDeveloper: 2applications: 2
Walkthrough

Fifty grams at 1:2 needs 100 g of developer, giving 150 g of mixture per application. Across two applications that is 100 g of colour and 200 g of developer. Note that a single developer bottle is often 1,000 ml, so developer is rarely the constraint β€” colour tubes usually are.

How to use this calculator

  1. Colour amount β€” A standard tube is typically 60 g.
  2. Developer parts β€” Parts of developer per one part colour. Always follow the manufacturer's instruction.
  3. Applications needed β€” Number of full applications you are mixing for.
  4. Read the result. Use the worked examples below to sanity-check against a known scenario.

Common mistakes and edge cases

Measuring by volume instead of weight

Colour and developer differ in density, so equal volumes are not equal weights. Use a scale β€” the ratio is specified by weight.

Confusing developer volume with the mixing ratio

Volume (10, 20, 30, 40) sets how much the hair lifts. Ratio (1:1, 1:2) sets how much developer to add. They are independent choices.

Adding extra developer to stretch the product

This dilutes pigment and weakens deposit, typically producing a result lighter and less durable than intended. Mix a second batch at the correct ratio instead.

Mixing too little for the hair length

Running out mid-application leaves banding where timing differs across the head. For shoulder-length or longer hair, plan on at least one and a half tubes.

Frequently asked questions

how much developer do I mix with hair colour
It depends on the ratio. At 1:1 use equal weights, so 60 g of colour takes 60 g of developer. At 1:2, the same tube takes 120 g.
what is the difference between developer volume and ratio
Volume (10, 20, 30, 40) sets how much the hair lifts. Ratio sets how much developer to add. They are independent choices and are often confused.
should I measure by weight or volume
Weight. Colour and developer have different densities, so equal volumes are not equal weights and the mixture ends up off-ratio.
how much colour do I need for long hair
Usually one and a half to three tubes depending on length and density. Running short partway through causes visible banding, so mix generously.
can I add extra developer to make it go further
No β€” it dilutes the pigment and weakens the result. Mix a second batch at the correct ratio instead.

Hair Developer Mixing glossary

Developer
A hydrogen peroxide solution mixed with colour to open the cuticle and activate the dye.
Volume
Developer strength β€” 10, 20, 30 or 40 β€” determining lift. Independent of the mixing ratio.
Mixing ratio
Parts of developer to one part colour, specified by the manufacturer and measured by weight.
Lift
How many levels lighter the natural pigment is taken. Governed by developer volume and processing time.

How we built this calculator

Methodology

The ratio states parts of developer per one part colour. At 1:1, equal weights are combined, so 60 g of colour takes 60 g of developer and yields 120 g of mixture. At 1:2, the same tube takes 120 g of developer for 180 g of mixture β€” half again as much product from the same amount of pigment, which is why high-lift formulas cover more hair but deposit less intensely.

Formula source
Manufacturer mixing ratios by weight
Last updated
2026-11-17
Calculation runs
Client-side only
NB
WRITTEN BY
Numora Beauty Team

Sources & references

Every numeric assumption traces to a primary source.

  1. U.S. Food and Drug Administration β€” Hair Dyes and Hair ProductsUSA
  2. Cosmetic Ingredient Review β€” Safety Assessment of Hydrogen Peroxide in CosmeticsUSA
  3. European Commission β€” Regulation (EC) No 1223/2009 on cosmetic productsINT
  4. Numora Editorial Policy. numora.net/editorial-policy