Download Time Calculator: Estimate Any Transfer
How long a file takes at a given speed
Try the calculator
Math runs in your browser. No sign-up.
Seconds, assuming the server can saturate your connection.
A 5GB GB file over 100Mbps Mbps takes about 7.41 minutes.
Multiply the file size in gigabytes by 8,000 to get megabits, then divide by your connection speed in Mbps. A 5 GB file on a 100 Mbps line is 40,000 megabits Γ· 100 = 400 seconds, or just under seven minutes before overhead.
Download time is file size divided by connection speed, but the units conspire to make it error-prone: files are measured in bytes and connections in bits, a factor of eight that explains why a 100 Mbps line never delivers 100 MB per second. This calculator handles that conversion and adds an overhead allowance for the protocol framing, retransmissions and congestion control that stop any real transfer from hitting the theoretical line rate. The result is the figure that matters in practice β how long you will actually wait. Overhead of 8β12% is typical for a healthy wired connection; Wi-Fi, mobile and congested links run considerably worse, and the server you are downloading from is often the real constraint rather than your own line.
What is a download time?
Estimate how long a download will take from file size and connection speed, with an allowance for the protocol overhead that stops any real transfer reaching the advertised line rate. The calculator handles the bits-to-bytes conversion that causes most of the confusion here β connections are sold in megabits, files are measured in megabytes, and the factor of eight between them is why a 100 Mbps line never moves 100 MB per second. Decimal units are used throughout, matching how download pages and storage vendors quote sizes.
The formula
Source: Size Γ· throughput with protocol overhead allowance.
Worked examples
1A 5 GB game update on a 100 Mbps line
Five gigabytes is 40,000 megabits. At a theoretical 100 Mbps that is exactly 400 seconds, or six minutes and forty seconds. This is the best case with no overhead; adding a realistic 10% allowance pushes it to about 7 minutes 24 seconds, which is much closer to what you will observe.
2A 25 GB archive on gigabit-class fibre
Twenty-five gigabytes is 200,000 megabits. A 500 Mbps link with 10% overhead delivers an effective 450 Mbps, giving 444 seconds β about 7 minutes 24 seconds. Note that this is the same wall-clock time as the 5 GB example above on a tenth of the bandwidth, which is the clearest way to see how directly the two scale.
How to use this calculator
- File size β Decimal gigabytes, as quoted by most download pages and storage vendors (1 GB = 1,000 MB).
- Connection speed β Megabits per second β the unit ISPs advertise. Note bits, not bytes.
- Protocol overhead β Share of raw bandwidth lost to framing, acknowledgements and retransmission. 8β12% is typical on wired links; set 0 for the theoretical best case.
- Read the result. Use the worked examples below to sanity-check against a known scenario.
Common mistakes and edge cases
Confusing megabits with megabytes
This is the dominant error. ISPs sell megabits per second (Mbps); file managers report megabytes (MB). A 100 Mbps connection delivers at best about 12.5 MB/s. Dividing file size in MB by speed in Mbps understates the time eightfold.
Assuming the advertised speed is what you get
Advertised rates are maxima under ideal conditions. Wi-Fi contention, older hardware, evening congestion and the distance to your access point all reduce real throughput, often by far more than the protocol overhead allowance.
Ignoring the server end
A download is only as fast as its slowest link. Many servers cap per-connection bandwidth well below your line rate, which is why a gigabit connection frequently downloads at 20 Mbps from a busy mirror.
Mixing decimal and binary gigabytes
Storage vendors and download pages use decimal GB (1,000 MB); operating systems often report binary GiB (1,024 MiB). The two differ by about 7%, so a file Windows calls 5 GB is nearer 5.37 decimal GB.
Frequently asked questions
how long does a 5 GB file take to download
why is my download slower than my internet speed
how many megabytes per second is 100 Mbps
what overhead percentage should I use
does the calculator account for Wi-Fi
what is the difference between GB and GiB
Download Time glossary
How we built this calculator
Methodology
The arithmetic rests on a unit conversion that causes most of the confusion in this topic. File sizes are quoted in bytes and connection speeds in bits, and there are eight bits to a byte. One decimal gigabyte is 1,000 megabytes, which is 8,000 megabits. So a 5 GB file is 40,000 megabits, and on a 100 Mbps connection that is 400 seconds β about six minutes and forty seconds, not the 50 seconds you would get by dividing 5,000 by 100.
Sources & references
Every numeric assumption traces to a primary source.
- IETF RFC 9293 β Transmission Control ProtocolINT
- NIST β Prefixes for Binary MultiplesUSA
- FCC β Measuring Broadband AmericaUSA
- Numora Editorial Policy. numora.net/editorial-policy