BPM to Delay Time Calculator: Lock Delay to Tempo
Delay and reverb times locked to tempo
Try the calculator
Math runs in your browser. No sign-up.
Milliseconds. One beat.
At 120BPM BPM a quarter note is 500 ms and a dotted eighth is 375 ms.
Divide 60,000 by the tempo to get the quarter-note length in milliseconds. At 120 BPM that is 500 ms, so an eighth is 250 ms, a dotted eighth 375 ms and a sixteenth 125 ms.
Delay and reverb settings sound deliberate when their timing lines up with the tempo of the track and muddy when they do not. The conversion is one division β 60,000 milliseconds in a minute, divided by the tempo, gives the length of a quarter note β and every other note value follows by halving or dotting. This calculator returns quarter, eighth, dotted eighth and sixteenth times together, because those are the four a producer reaches for most. The dotted eighth is the one worth knowing: it is the characteristic sound of rhythmic guitar delay, creating a galloping pattern against a straight eighth-note part because it lands between the beats.
What is a bpm to delay time?
Convert any tempo into delay times in milliseconds for quarter, eighth, dotted eighth and sixteenth notes. Delay and reverb sound intentional when their timing matches the tempo of the track, and the conversion is a single division: 60,000 milliseconds in a minute divided by the tempo gives one beat. Useful whenever a plugin lacks tempo sync, when a recorded performance drifts from the project tempo, or when scoring to picture.
The formula
Source: Tempo-to-millisecond conversion (60,000 Γ· BPM).
Worked examples
1A delay at 120 BPM
At 120 BPM the quarter note is exactly 500 ms, which makes it the tempo everyone learns the ratios from: eighth 250 ms, dotted eighth 375 ms, sixteenth 125 ms. Setting a guitar delay to 375 ms here produces the interlocking pattern against straight eighths that defines a great deal of arena rock.
2A slower tempo with awkward numbers
At 90 BPM the quarter note is 666.67 ms β a repeating decimal, which is where doing this by ear becomes unreliable. The dotted eighth lands on a clean 500 ms, a coincidence worth noticing: a dotted eighth at 90 BPM equals a quarter note at 120. Rounding 666.67 to 667 ms is inaudible in practice.
How to use this calculator
- Tempo β Beats per minute. Most DAWs display this in the transport bar.
- Read the result. Use the worked examples below to sanity-check against a known scenario.
Common mistakes and edge cases
Leaving tempo sync enabled
If the plugin is synced to the host, typing a millisecond value does nothing β the host tempo wins. Switch to free or millisecond mode first.
Using 60 instead of 60,000
The constant is 60,000 because the answer is in milliseconds, not seconds. Dividing 60 by the tempo gives seconds, and mistaking the two puts the delay a thousand times off.
Assuming a quarter note is always the beat
In 6/8 and similar compound metres the dotted quarter usually carries the pulse. The arithmetic still works, but the note value you want is not the quarter.
Exact-syncing everything
Perfectly locked delays can sound stiff. Many engineers detune the delay time by a few milliseconds, or use a slightly off value, to keep repeats audible and give the part some life.
Frequently asked questions
how do I calculate delay time from BPM
what is the delay time for 120 BPM
what is a dotted eighth delay
why is my delay plugin ignoring the value I typed
does this work for reverb too
BPM to Delay Time glossary
How we built this calculator
Methodology
There are 60,000 milliseconds in a minute, and tempo is expressed in beats per minute, so dividing 60,000 by the tempo gives the duration of one beat. In common time a beat is a quarter note, so at 120 BPM a quarter note lasts exactly 500 ms.
Sources & references
Every numeric assumption traces to a primary source.
- Audio Engineering Society β Journal of the AES, Time-Based EffectsINT
- MIDI Association β MIDI 1.0 Detailed Specification, TimingINT
- Numora Editorial Policy. numora.net/editorial-policy