Skip to main content
numora.
numora.

Centimeters to Feet Converter: Convert cm to Feet and Inches

Convert centimeters to feet instantly using the exact NIST-defined factor β€” 1 inch = 2.54 cm exactly.

ConversionsByΒ Numora Conversion TeamPublished byΒ Numora Editorial Team

Try the calculator

Math runs in your browser. No sign-up.

Assumptions
in
Decimal feet
Enter your values

Fill in the centimeters to see your result.

This converter uses the internationally defined exact factor 1 foot = 30.48 centimetres as specified in NIST SP 811 and the international yard and pound agreement of 1959. The result is exact within floating-point arithmetic.

Embed this calculator on your own site β€” drop in a one-line iframe.
Try a scenario
Quick takeaway

**One foot equals exactly 30.48 centimetres β€” no rounding, no approximation.** That definition has been fixed since the 1959 international yard and pound agreement, ratified by the US, UK, Australia, Canada, New Zealand, and South Africa. Dividing your centimetre value by 30.48 gives the exact decimal-foot equivalent. To split that into feet and inches, take the fractional part and multiply by 12. A common mistake is using 30.5 or 0.0328 as a shortcut β€” both introduce errors above 0.1% that compound in engineering and medical contexts.

What is a centimeters to feet?

Converting centimetres to feet uses a single exact relationship: one foot equals 30.48 centimetres, as defined by the 1959 international yard and pound agreement and codified in NIST Special Publication 811. Divide any centimetre value by 30.48 to get decimal feet; multiply the fractional remainder by 12 to get the inches portion. This converter applies the full unrounded factor β€” not the common approximation of 30.5 β€” so results are accurate to the limits of floating-point arithmetic. Common queries include height conversions (160 cm to feet, 170 cm to feet, 180 cm to feet) and construction measurements where metric drawings must translate to US customary units. All conversion factors are sourced directly from NIST SP 811 (2008 edition).

The formula

ft = cm Γ· 30.48
  • ft β€” length in feet (decimal)
  • cm β€” length in centimetres (input)
  • 30.48 β€” exact centimetres per foot, per NIST SP 811 and the 1959 international yard and pound agreement

Source: International yard and pound agreement (1959), codified in NIST SP 811 (2008), Table B.6: 1 ft = 0.3048 m exactly, therefore 1 ft = 30.48 cm exactly.

Worked examples

1Average adult male height: 180 cm

Inputs
cm: 180
Walkthrough

180 cm is a common benchmark for adult male height. Applying the exact factor: 180 Γ· 30.48 = 5.905511811023622 feet. The whole-number part is 5 feet. The fractional remainder is 0.905511811... Γ— 12 = 10.866141732... inches, so the result is 5 feet 10.866 inches β€” commonly rounded to 5 ft 10.9 in. Many people approximate 180 cm as 5 ft 11 in, which overstates by 0.134 inches (3.4 mm). For clothing, that rounding is harmless; for a clinical measurement or sports record, it represents a meaningful discrepancy that should be avoided.

2Exact definitional anchor: 30.48 cm = 1 foot

Inputs
cm: 30.48
Walkthrough

30.48 cm is the definitional value of exactly one international foot. Dividing 30.48 Γ· 30.48 gives exactly 1.000000 feet β€” the cleanest possible verification of the conversion. The 1959 international yard and pound agreement fixed 1 inch = 2.54 cm exactly, so 1 foot = 12 Γ— 2.54 = 30.48 cm exactly. This case confirms no truncation of the factor occurs anywhere in the calculator. The result carries no measurement uncertainty β€” it is a definition, not a physical measurement, so the relationship is exact within the mathematical system.

3One metre: 100 cm

Inputs
cm: 100
Walkthrough

100 cm (one metre) converts to 100 Γ· 30.48 = 3.280839895013123 feet. Split into feet and inches: 3 feet and 0.280839895... Γ— 12 = 3.370078740... inches. So one metre is exactly 3 feet 3.370 inches. The commonly cited approximation '1 metre β‰ˆ 3 ft 3β…œ in' (3.375 inches) overstates by 0.005 inches (0.127 mm). For laying out a room using a one-metre rule alongside a US tape measure, the precise figure is 3 ft 3.370 in β€” close enough to 3 ft 3β…œ in for most trades work, but the difference matters in precision manufacturing.

How to use this calculator

  1. Centimeters β€” Enter the length in centimeters you want to convert. For example, 180 cm is a common adult height.
  2. Read the result. Use the worked examples below to sanity-check against a known scenario.

What your result means and what to do next

Typical range
Human heights range from roughly 50 cm (newborn) to 272 cm (tallest recorded adult). The global adult mean is approximately 160–175 cm (5 ft 3 in to 5 ft 9 in) depending on region and sex. Room heights in residential construction typically run 243.84 cm (8 ft) to 304.8 cm (10 ft).
If the result looks wrong
Double-check that you entered centimetres, not millimetres or metres. 1800 cm (entered accidentally for a 180 cm height) would return 59.055 ft. Millimetre inputs should be divided by 10 before entry.
When precision matters
For engineering drawings, medical records, and manufacturing tolerances, use the full six-decimal result. For everyday height comparisons, rounding to the nearest 0.1 inch is sufficient. For clothing and shoe sizing, manufacturers apply their own rounding conventions β€” confirm with the brand's size chart.
Common misreading
Seeing '5.9 feet' and reading it as '5 feet 9 inches'. The 0.9 is nine-tenths of a foot, which equals 10.8 inches. Always convert the decimal portion by multiplying by 12.

Common mistakes and edge cases

Using 30.5 Instead of 30.48

The single most common error is dividing by 30.5 rather than 30.48. At 180 cm, this gives 5.9016 ft instead of 5.9055 ft β€” a discrepancy of 0.039 ft (about 11.9 mm). Over a 10-metre run in construction, the accumulated error reaches 11.9 cm β€” enough to misplace a wall stud or structural anchor by nearly half an inch.

Rounding the Factor to 0.0328 (ft per cm)

Some quick-reference charts state '1 cm = 0.0328 ft'. The exact value is 1 Γ· 30.48 = 0.032808398950131... ft. Rounding to 0.0328 introduces an error of 0.025% per centimetre. At 500 cm this produces a result of 16.4 ft instead of the correct 16.4042 ft β€” an error of 0.5 inches.

Confusing Decimal Feet with Feet-and-Inches

A result of 5.75 decimal feet does not mean 5 feet 75 inches or 5 feet 7.5 inches. The decimal fraction must be multiplied by 12 to get inches. 5.75 ft = 5 feet + (0.75 Γ— 12) inches = 5 feet 9 inches exactly. This is the most frequent misread on tape measures and in spreadsheet imports from metric CAD files.

How small changes affect your result

The centimetre-to-foot conversion is linear, so sensitivity is constant across all values. Every additional 30.48 cm adds exactly 1.000000 feet to the result with no non-linearity, compounding, or diminishing returns.

+1 cm
** Increases the result by 1 Γ· 30.48 = 0.032808 feet, or 0.393701 inches (about 10/25 of an inch).
+10 cm
** Increases the result by 0.32808 feet, or 3.93701 inches.
+30.48 cm
** Increases the result by exactly 1.000000 feet β€” the definitional anchor.
+100 cm (1 metre)
** Increases the result by 3.280840 feet, or 3 feet 3.370 inches.
Rounding error at +1 cm using approximate factor 30.5
** Result is 0.032787 ft instead of 0.032808 ft β€” an error of 0.000021 ft (0.00025 inches) per centimetre, cumulating to 0.021 ft (0.25 inches) over 1000 cm.

Common heights in centimetres and their exact foot equivalents

CentimetresDecimal feetFeet and inchesCommon approximationApproximation error
152.4 cm5.000000 ft5 ft 0.000 in5 ft 0 in0.000 in
160.0 cm5.249344 ft5 ft 2.992 in5 ft 3 in+0.008 in
165.0 cm5.413386 ft5 ft 4.961 in5 ft 5 in+0.039 in
170.0 cm5.577428 ft5 ft 6.929 in5 ft 7 in+0.071 in
175.0 cm5.741469 ft5 ft 8.897 in5 ft 9 in+0.103 in
180.0 cm5.905512 ft5 ft 10.866 in5 ft 11 in+0.134 in
182.88 cm6.000000 ft6 ft 0.000 in6 ft 0 in0.000 in
185.0 cm6.069554 ft6 ft 0.835 in6 ft 1 in+0.165 in
190.0 cm6.233596 ft6 ft 2.803 in6 ft 3 in+0.197 in
200.0 cm6.561680 ft6 ft 6.740 in6 ft 7 in+0.260 in

Decimal feet computed using exact factor 30.48 (NIST SP 811). 'Common approximation' is the nearest whole inch. Approximation error shows how much rounding to the nearest inch overstates the true value.

Frequently asked questions

How many centimeters are in a foot?
Exactly 30.48 centimetres per foot. This is a definitional value fixed by the 1959 international yard and pound agreement and codified in NIST SP 811. It is not a rounded approximation β€” 1 inch equals 2.54 cm exactly, and 12 inches Γ— 2.54 = 30.48 cm exactly.
What is 180 cm in feet and inches?
180 cm equals 5 feet 10.866 inches (5.9055 decimal feet). The common shorthand '5 ft 11 in' overstates the height by about 0.034 inches (0.86 mm). For most everyday purposes the rounding is harmless, but medical and clinical records should use the precise figure.
What is 160 cm in feet?
160 cm equals 5.249344 decimal feet, or 5 feet 2.992 inches β€” typically quoted as 5 ft 3 in. The precise value is 160 Γ· 30.48 = 5.24934383202099 feet.
Is it more accurate to use 30.48 or 30.5 to convert cm to feet?
Always use 30.48. It is the exact international definition. Using 30.5 introduces an error of 0.065% per conversion β€” small for a single measurement, but it compounds in repeated calculations and can cause millimetre-scale errors in engineering drawings and manufacturing tolerances.
How do I convert centimeters to feet and inches?
Divide the centimetre value by 30.48 to get decimal feet. Take the whole-number part as feet. Multiply the fractional remainder by 12 to get inches. Example: 175 cm Γ· 30.48 = 5.741469 ft β†’ 5 feet, 0.741469 Γ— 12 = 8.897 inches β†’ 5 ft 8.9 in.
What is 5 feet in centimeters?
5 feet equals exactly 152.4 centimetres (5 Γ— 30.48 = 152.4). This is an exact result with no rounding because the foot-to-centimetre relationship is itself exact.
What is 6 feet in centimeters?
6 feet equals exactly 182.88 centimetres (6 Γ— 30.48 = 182.88). Many people round this to 183 cm; the error is 0.12 cm or about 1.2 mm β€” usually harmless for height comparisons but worth noting for precision work.
Why does 1 inch equal 2.54 cm exactly?
The 1959 international yard and pound agreement, signed by the US, UK, Australia, Canada, New Zealand, and South Africa, defined 1 inch as exactly 2.54 centimetres. Before 1959, the US and UK used slightly different inch definitions. The agreement harmonised them into one exact value, which flows directly into the foot (12 Γ— 2.54 = 30.48 cm).

Centimeters to Feet glossary

Foot (international)
A unit of length defined as exactly 0.3048 metres (30.48 centimetres) under the 1959 international yard and pound agreement. The international foot superseded slightly different national definitions used before 1959.
Also called: ft Β· international foot
Centimetre
One hundredth of a metre, the SI base unit of length. The metre is defined by fixing the speed of light at 299,792,458 m/s (BIPM, 2019 SI revision).
Also called: cm Β· centimeter
Exact conversion factor
A conversion ratio that is defined rather than measured, carrying no measurement uncertainty. The relationship 1 ft = 30.48 cm is exact by international treaty, not an empirical approximation.
Decimal feet
A representation of a length in feet where the sub-foot portion is expressed as a decimal fraction rather than inches. For example, 5.5 decimal feet equals 5 feet 6 inches.
NIST SP 811
NIST Special Publication 811, 'Guide for the Use of the International System of Units (SI)', published by the US National Institute of Standards and Technology. The authoritative US reference for SI unit conversions, including the foot-to-metre relationship.
Also called: Special Publication 811 Β· NIST guide to SI

How we built this calculator

Methodology

The centimetre-to-foot conversion rests on a single exact definition: one inch equals 2.54 centimetres. That relationship was fixed internationally in 1959 and has not changed since. Because one foot contains 12 inches, one foot equals 12 Γ— 2.54 = 30.48 centimetres exactly.

Formula source
International yard and pound agreement (1959), codified in NIST SP 811 (2008), Table B.6: 1 ft = 0.3048 m exactly, therefore 1 ft = 30.48 cm exactly
Last updated
2026-04-23
Calculation runs
Client-side only
NC
WRITTEN BY
Numora Conversion Team
NE
PUBLISHED BY
Numora Editorial Team

Reviewed on 2026-04-23 Β· Next review: 2027-04-23

See editorial policy

Sources & references

Every numeric assumption traces to a primary source.

  1. NIST SP 811 (2008) β€” Guide for the Use of the International System of Units, Table B.6USA
  2. NIST β€” Approximate Conversions to Metric (official conversion factor reference)USA
  3. BIPM SI Brochure (9th edition, 2019) β€” metre definitionINT
  4. Federal Register β€” Metric Conversion Act, international yard and pound agreementUSA
  5. UK National Physical Laboratory β€” Conversion factors for units of lengthGBR
  6. Numora Editorial Policy. numora.net/editorial-policy