Skip to main content
numora.
numora.

Centimeters to Inches Converter: Convert cm to Inches Exactly

Convert centimeters to inches instantly using the exact NIST-defined factor: 1 inch = 2.54 cm exactly

ConversionsByΒ Numora Conversion TeamPublished byΒ Numora Editorial Team

Try the calculator

Math runs in your browser. No sign-up.

Assumptions
in
Inches
Enter your values

Fill in the centimeters to see your result.

This converter uses the exact defined value 1 inch = 2.54 centimeters as adopted by the international inch standard in 1959 and codified in NIST SP 811.

Embed this calculator on your own site β€” drop in a one-line iframe.
Try a scenario
Quick takeaway

**To convert centimeters to inches, divide by exactly 2.54.** That factor is not an approximation β€” it was defined as an exact integer by international agreement in 1959 (the International Yard and Pound Agreement) and is the basis of NIST SP 811. So 100 cm = 100 Γ· 2.54 = 39.3701 in. The reverse β€” multiplying inches by 2.54 β€” gives centimeters. Using 0.3937 as the multiplier introduces a rounding error of roughly 0.003% per conversion, which compounds when you chain conversions.

What is a centimeters to inches?

Converting centimeters to inches requires dividing by 2.54 β€” a factor that is not an approximation but an exact defined value, established by the 1959 International Yard and Pound Agreement and codified in NIST Special Publication 811. One centimeter equals 0.3937 inches; one inch equals exactly 2.54 centimeters. This converter uses the full precision of the defined constant with no intermediate rounding, so results are as accurate as your input measurement. Common uses include converting body height from metric to US customary, checking product dimensions, and reading technical drawings. Reviewed against NIST SP 811 (2008) Table B.6.

The formula

in = cm Γ· 2.54
  • in β€” length in inches (the result)
  • cm β€” length in centimeters (the input)
  • 2.54 β€” exact defined conversion factor: 1 international inch = 2.54 cm exactly (NIST SP 811, 2008)

Source: 1 international inch = 2.54 cm exactly, per NIST SP 811 (2008) Table B.6 and the 1959 International Yard and Pound Agreement.

Worked examples

1Converting a person's height: 170 cm

Inputs
cm: 170
Walkthrough

170 cm is a commonly reported adult height in countries using the metric system. To convert: 170 Γ· 2.54 = 66.929133858... inches. The factor 2.54 is exact per NIST SP 811, so no rounding error enters the arithmetic β€” only the final display is rounded. To express in feet and inches, divide total inches by 12: 66.929 Γ· 12 = 5 feet with 6.929 inches remaining, so 170 cm = 5 ft 6.93 in. Many online converters display 5 ft 7 in for 170 cm, which overstates the height by roughly 0.07 inches (1.8 mm). For a medical record or passport, the precise value 5 ft 6.93 in is more accurate.

2One metre: 100 cm

Inputs
cm: 100
Walkthrough

100 cm equals exactly one metre. Converting to inches: 100 Γ· 2.54 = 39.37007874015748... inches. NIST SP 811 Table B.6 states 1 m = 39.37007874 in, confirming the result to 8 decimal places. The full decimal expansion is non-terminating because 100 and 2.54 share no common factor that resolves to a terminating decimal β€” but the underlying relationship is exact. Rounded to four significant figures, 100 cm = 39.37 in. Textbooks sometimes cite 39.4 in, which introduces an error of 0.03 inches (0.76 mm) per metre β€” large enough to matter in carpentry or fabric cutting.

3One inch verification: 2.54 cm

Inputs
cm: 2.54
Walkthrough

By definition, 1 international inch = 2.54 cm exactly. Entering 2.54 cm should return exactly 1.0000 inches: 2.54 Γ· 2.54 = 1. This is the definitional anchor and the most important test case for any cm-to-inch converter. The 1959 International Yard and Pound Agreement, signed by the United States, United Kingdom, Australia, Canada, New Zealand, and South Africa, established this exact relationship. All US customary and imperial length conversions trace back to this single constant. Any converter that returns a value other than exactly 1.0000 for an input of 2.54 cm has an implementation error.

How to use this calculator

  1. Centimeters β€” Enter any length in centimeters. For example, a person who is 170 cm tall would enter 170 here.
  2. Read the result. Use the worked examples below to sanity-check against a known scenario.

What your result means and what to do next

Typical range
Most everyday length conversions fall between 1 cm (0.3937 in, the width of a fingernail) and 200 cm (78.74 in, roughly 6 ft 6 in, the height of a tall adult). Medical height measurements worldwide typically run 140–210 cm (55–83 in).
If the result looks wrong
The most common cause is a decimal-point entry error β€” entering 17.0 cm instead of 170 cm produces 6.69 in instead of 66.93 in. Double-check the input before reusing the number elsewhere.
When precision matters
For engineering or manufacturing applications, use the full decimal result rather than the feet-and-inches display. A measurement of 25.4 cm = exactly 10.0000 in. Any rounding of the intermediate result β€” say, to 10.0 in β€” loses sub-millimeter precision that may matter for tight tolerances.
Common misreading
Height stated as "5'7" does not mean 5.7 feet. It means 5 feet and 7 inches, which is 67 inches total, or 170.18 cm. Treating the number after the apostrophe as a decimal fraction of a foot overstates the height by several centimeters.

Common mistakes and edge cases

Using 0.394 or 0.3937 as the Multiplier

Multiplying centimeters by 0.3937 is a common shortcut that introduces a rounding error of about 0.00008 inches per centimeter (0.008% per conversion). Over a single everyday measurement the error is invisible, but in a chain of conversions β€” such as scaling a technical drawing β€” it compounds. The correct method is always to divide by 2.54, which uses the exact defined factor without truncation.

Confusing Decimal Inches with Feet-and-Inches

A result of 66.93 inches is not "66 feet 93 inches." Decimal inches are a single unit measured in tenths and hundredths of an inch. To convert 66.93 inches to feet and inches, divide by 12: 5 feet with 6.93 inches remaining. This confusion is especially common when copying height measurements between systems β€” a person who is 170 cm is 5 ft 6.93 in, not 5 ft 10 in or 66 ft.

Assuming 1 Metre = 39.4 Inches

Textbooks and rough-estimate guides sometimes cite 1 m β‰ˆ 39.4 in for quick mental arithmetic. The exact value is 39.37007874... in. The 0.03-inch difference is harmless for a rough estimate but can mislead when checking, for example, whether a 100 cm object fits through a 39.5-inch opening β€” the actual clearance would be 0.13 inches, not 0.1 inches.

How small changes affect your result

Because the conversion is a single linear formula (inches = cm Γ· 2.54), sensitivity is constant and perfectly proportional β€” there are no inflection points or nonlinearities.

+1 cm input
** Result increases by exactly 0.393700787... inches (β‰ˆ 0.3937 in).
+10 cm input
** Result increases by exactly 3.93700787... inches (β‰ˆ 3.9370 in).
+100 cm input (1 metre)
** Result increases by exactly 39.3700787... inches.
Doubling the input
** Doubles the output exactly. 100 cm = 39.3701 in; 200 cm = 78.7402 in.
Rounding the factor to 0.3937
** On a 1 cm input, the error is 0.0000008 in β€” negligible. On a 100 cm input, the error grows to 0.0000787 in. On a 10,000 cm (100 m) input, the error reaches 0.00787 in (about 0.2 mm) β€” still small, but detectable with precision instruments.

Common centimeter benchmarks and their inch equivalents

CentimetersDecimal inchesFeet & inchesCommon reference
2.54 cm1.0000 in0 ft 1 inOne inch (definitional anchor)
30.48 cm12.0000 in1 ft 0 inOne foot (exact)
100 cm39.3701 in3 ft 3.37 inOne metre
152.4 cm60.0000 in5 ft 0 inFive feet (exact)
170 cm66.9291 in5 ft 6.93 inAverage adult height (global)
182.88 cm72.0000 in6 ft 0 inSix feet (exact)
200 cm78.7402 in6 ft 6.74 inTwo metres

All conversions use the exact factor 1 in = 2.54 cm. Rows with 'exact' in the reference column have zero rounding error.

Frequently asked questions

How many inches is 1 cm?
1 cm equals 0.393700787... inches. The exact value is 1 Γ· 2.54, which is a repeating decimal. In practice, 0.3937 in is accurate to four decimal places. The underlying factor (2.54) is exact by international definition, not a measured approximation.
How many cm in an inch?
Exactly 2.54 cm in one inch. This is a defined value, established by the 1959 International Yard and Pound Agreement and codified in NIST SP 811. It is not an approximation β€” there is no more precise figure because 2.54 is the definition.
How do I convert cm to feet and inches?
First divide by 2.54 to get total inches. Then divide by 12 to get whole feet, and take the remainder as inches. Example: 170 cm Γ· 2.54 = 66.929 in; 66.929 Γ· 12 = 5 feet with 6.929 inches remaining, so 170 cm = 5 ft 6.93 in.
What is 5 feet in cm?
5 feet equals 60 inches, and 60 Γ— 2.54 = 152.4 cm exactly. Because the factor is 2.54 (exact), all whole-inch values convert to exact centimeter values with no rounding error.
What is 6 feet in cm?
6 feet = 72 inches. 72 Γ— 2.54 = 182.88 cm exactly. So someone described as 6 feet tall is 182.88 cm, often rounded to 183 cm in medical records.
Is 2.54 exact or an approximation?
It is exact. The 1959 International Yard and Pound Agreement defined 1 international inch as exactly 2.54 cm β€” a whole-number relationship with two decimal places. There is no hidden precision beyond 2.54. NIST SP 811 and the BIPM SI Brochure both confirm this.
What is 170 cm in feet and inches?
170 cm = 66.9291 inches = 5 feet 6.9291 inches, commonly rounded to 5 ft 7 in. The precise value is 5 ft 6.93 in. Many sources round up to 5 ft 7 in; the actual measurement is about 0.07 inches short of that.
Why do some converters use 0.3937 instead of dividing by 2.54?
Multiplying by 0.3937 is an approximation of the exact reciprocal 1 Γ· 2.54 = 0.39370078740... Rounding to 0.3937 introduces an error of about 0.000079 inches per centimeter β€” negligible in everyday use but cumulative in precision engineering. Dividing by 2.54 is always more accurate.

Centimeters to Inches glossary

International inch
The inch as defined by the 1959 International Yard and Pound Agreement, equal to exactly 2.54 centimeters. Superseded older slightly different national definitions used by the US and UK before 1959.
Also called: inch Β· in Β· "
Centimeter
A unit of length in the International System of Units (SI), equal to one hundredth of a metre. Symbol: cm.
Also called: centimetre Β· cm
NIST SP 811
NIST Special Publication 811, 'Guide for the Use of the International System of Units (SI)' β€” the US federal government reference for unit conversions and SI usage, published by the National Institute of Standards and Technology.
Also called: SP 811 Β· NIST Guide to SI
Exact conversion
A unit conversion defined by an integer or simple rational relationship with no rounding error, as opposed to an approximate factor derived from measurement. The cm-to-inch factor 2.54 is exact by international treaty.
Foot / feet
A US customary and imperial unit of length equal to 12 inches, or exactly 30.48 cm (derived from the same 1959 agreement). Symbol: ft.
Also called: ft Β· '

How we built this calculator

Methodology

The centimeter-to-inch conversion rests on a single defined constant: 1 international inch = 2.54 cm exactly. This was not measured β€” it was agreed upon by treaty in 1959. Because the factor is exact, the only source of error in a cm-to-inch conversion is rounding the output for display.

Formula source
1 international inch = 2.54 cm exactly, per NIST SP 811 (2008) Table B.6 and the 1959 International Yard and Pound Agreement
Last updated
2026-04-23
Calculation runs
Client-side only
NC
WRITTEN BY
Numora Conversion Team
NE
PUBLISHED BY
Numora Editorial Team

Reviewed on 2026-04-23 Β· Next review: 2027-04-23

See editorial policy

Sources & references

Every numeric assumption traces to a primary source.

  1. NIST SP 811 (2008) β€” Guide for the Use of the International System of Units, Table B.6: Conversion factors for lengthUSA
  2. BIPM SI Brochure (9th edition, 2019) β€” The International System of UnitsINT
  3. Federal Register β€” Notices of Adoption of International Foot (1959 International Yard and Pound Agreement)USA
  4. ISO 80000-1:2022 β€” Quantities and units, Part 1: GeneralINT
  5. UK National Measurement Office β€” Guidance on use of metric and imperial unitsUK
  6. Numora Editorial Policy. numora.net/editorial-policy