Skip to main content
numora.
numora.

Meters to Feet Converter: Convert Meters to Feet Precisely

Convert meters to feet instantly using the exact NIST-defined factor: 1 meter = 3.280839895 feet

ConversionsByΒ Numora Conversion TeamPublished byΒ Numora Editorial Team

Try the calculator

Math runs in your browser. No sign-up.

Assumptions
ft
Feet (decimal)
Enter your values

Fill in the meters to see your result.

This converter uses the internationally defined exact factor 1 ft = 0.3048 m (NIST SP 811, 2008 edition), giving 1 m = 3.280839895... ft. The displayed result is rounded to 6 decimal places; the underlying computation uses full double-precision arithmetic.

Embed this calculator on your own site β€” drop in a one-line iframe.
Try a scenario
Quick takeaway

**One meter equals 3.280839895 feet β€” a number that follows directly from the exact legal definition 1 ft = 0.3048 m.** Multiply your meter value by 3.280839895, or divide by 0.3048, and you get the same answer. For everyday use, 1 m β‰ˆ 3 ft 3β…œ in. The most common mistake is rounding to 3.28, which introduces a 0.027% error β€” invisible on a room measurement but material in engineering or athletics timing.

What is a meters to feet?

Converting meters to feet requires one exact number: 3.280839895, the reciprocal of 0.3048. The foot has been defined as exactly 0.3048 meters since the International Yard and Pound Agreement of 1959, making the meter-to-foot factor a non-terminating decimal derived from that definition. This converter uses the full-precision factor documented in NIST Special Publication 811 (2008 edition) β€” the authoritative US reference for metric-to-imperial unit conversions. Enter any meter value to see decimal feet, feet-and-inches, total inches, and yards. Results match the conversion factors used in NIST-traceable instrumentation.

The formula

ft = m Γ— 3.280839895...
  • ft β€” length in feet
  • m β€” length in meters
  • 3.280839895… β€” exact reciprocal of 0.3048; the foot is defined as exactly 0.3048 m (NIST SP 811)

Source: International foot definition: 1 ft = 0.3048 m exactly (NIST SP 811, 2008 edition, Appendix B, Table B.6).

Worked examples

1One meter β€” establishing the exact factor

Inputs
meters: 1
Walkthrough

The foot is defined internationally as exactly 0.3048 meters (NIST SP 811, 2008 edition, Appendix B). Taking the reciprocal gives 1 Γ· 0.3048 = 3.280839895013123... feet per meter β€” a non-terminating decimal because 0.3048 is not a power of 2 or 5 in base 10. So 1 m = 3.280839895 ft when rounded to 9 decimal places. In feet and inches: 1 m = 3 ft 3.37 in. This baseline is used in every other example below; every result scales linearly from this factor.

2Average adult height β€” 1.8 meters

Inputs
meters: 1.8
Walkthrough

1.8 m Γ— 3.280839895 = 5.905511811 ft. The whole-feet component is 5 ft. The remainder is 0.905511811 ft Γ— 12 = 10.866 in, so the full expression is 5 ft 10.87 in β€” commonly rounded to 5 ft 11 in in everyday use. The exact calculation: 1.8 Γ— (1 / 0.3048) = 1.8 / 0.3048 = 5.90551181102... ft. This example shows why rounding the factor to 3.28 produces 5.904 ft (off by 0.0015 ft, or about 0.46 mm) β€” negligible for a doorway but detectable with a tape measure.

3100 meters β€” athletics track

Inputs
meters: 100
Walkthrough

100 m Γ— 3.280839895 = 328.0839895 ft, or 328 ft 1.008 in. World Athletics uses metric distances exclusively; conversion to feet appears in US broadcast commentary and venue signage. At this scale, using the rounded factor 3.28 gives 328.0 ft β€” a shortfall of 0.084 ft (about 1 inch), which is within lane-width tolerances but would matter for precise surveying. The correct conversion β€” 328 ft 1 in β€” is what NIST-traceable documentation would state.

How to use this calculator

  1. Meters β€” Enter any length in meters β€” for example, 1.8 m for average adult height, or 100 m for a sprint distance.
  2. Read the result. Use the worked examples below to sanity-check against a known scenario.

What your result means and what to do next

Typical range
Most human-scale measurements fall between 0.1 m (10 cm, about 4 in) and 10 m (about 32.8 ft). Room heights are typically 2.4–3 m (7.9–9.8 ft); standard door heights are 2.032 m (6.667 ft = 6 ft 8 in) in the US.
If the result looks wrong
Check whether you entered meters or centimeters. 180 cm should be entered as 1.80 m, not 180 m (which would give 590.5 ft β€” taller than a 50-story building).
Engineering precision
For structural, civil, or aerospace work, retain at least 4 decimal places (0.1 mm precision). For everyday carpentry or furniture, 2 decimal places (about 3 mm) is sufficient.
When to use the inverse
To convert feet to meters, multiply by 0.3048 (exact). For example, 6 ft Γ— 0.3048 = 1.8288 m exactly.

Common mistakes and edge cases

Using 3.28 Instead of the Full Factor

Rounding the factor to 3.28 is the most common shortcut β€” and it introduces a 0.027% error per meter. On a 10 m measurement that is 2.7 mm; on a 1,000 m run it is 27 cm. NIST SP 811 explicitly warns against using rounded conversion factors for technical work. Use 3.280839895 or, better, divide directly by 0.3048.

Confusing Decimal Feet with Feet-and-Inches

A result of 5.5 ft does not mean 5 ft 5 in. It means 5 ft 6 in (0.5 Γ— 12 = 6 inches). This confusion causes errors in carpentry, construction, and height charts. Always convert the decimal remainder by multiplying by 12 to get inches, not by moving the decimal point.

Using the US Survey Foot for Modern Conversions

Before 2023, US geodetic data used the survey foot (1200/3937 m β‰ˆ 0.3048006 m), which is about 0.6 mm longer per mile than the international foot. NIST retired the survey foot on January 1, 2023. Using old survey-foot tables for new measurements will produce a small but systematic error in GPS and cadastral work.

How small changes affect your result

The meters-to-feet conversion is perfectly linear β€” there are no thresholds, bands, or non-linear regions. The factor 3.280839895 applies identically at 0.001 m (1 mm) and at 8,848 m (Everest).

Rounding the factor to 3.28
** introduces a fixed relative error of 0.000839895 / 3.280839895 = 0.0256% per meter. - At 1 m: error = 0.000839895 ft β‰ˆ 0.26 mm - At 10 m: error = 0.00839895 ft β‰ˆ 2.6 mm - At 100 m: error = 0.0839895 ft β‰ˆ 25.6 mm (about 1 inch) - At 1,000 m: error = 0.839895 ft β‰ˆ 256 mm (about 10 inches)
Rounding to 3.281
** error = 0.000160105 ft/m β€” about 30% of the 3.28 error, still 16 cm at 1,000 m.
Using the exact definition (Γ· 0.3048)
** zero rounding error β€” this is the recommended approach for any computation where precision matters.

Meters to feet β€” common reference distances

MetersExact feet (decimal)Feet and inches
0.3048 m1.000000 ft1 ft 0 in
1.000 m3.280840 ft3 ft 3.37 in
1.524 m5.000000 ft5 ft 0 in
1.800 m5.905512 ft5 ft 10.87 in
2.000 m6.561680 ft6 ft 6.74 in
10.000 m32.808399 ft32 ft 9.70 in
100.000 m328.083990 ft328 ft 1.01 in
1000.000 m3280.839895 ft3280 ft 10.07 in

All values computed using the exact factor 1 / 0.3048 = 3.280839895013123... per NIST SP 811 (2008).

Frequently asked questions

How many feet is 1 meter exactly?
Exactly 1 / 0.3048 feet, which equals 3.280839895013123... feet (non-terminating decimal). The foot is defined as exactly 0.3048 meters by the 1959 international foot agreement, so the meter-to-foot ratio is derived from that definition. For most purposes, 3.280839895 rounded to 9 decimal places is sufficient.
Is 1 meter equal to 3 feet?
No β€” 1 meter is about 3.281 feet, not 3 feet. The difference is roughly 3.37 inches (8.56 cm). Saying 1 m β‰ˆ 3 ft is a 15% understatement and would cause significant errors in any practical measurement.
What is the exact conversion factor from meters to feet?
The exact factor is 1 / 0.3048, because the foot is legally defined as 0.3048 meters exactly (NIST SP 811, 2008). Dividing 1 by 0.3048 yields 3.280839895013123..., a repeating decimal. Using the rounded value 3.28 introduces a 0.027% error per meter.
How do I convert meters to feet and inches?
Multiply meters by 3.280839895 to get decimal feet. Take the whole-number part as feet. Multiply the decimal remainder by 12 to get inches. For example, 1.75 m Γ— 3.280839895 = 5.7414 ft β†’ 5 ft, 0.7414 Γ— 12 = 8.90 in β†’ 5 ft 8.9 in.
Why is 1 foot 0.3048 meters?
In 1959, the US, UK, Australia, Canada, New Zealand, and South Africa agreed to standardize the foot as exactly 0.3048 meters to harmonize engineering and trade measurements across metric and imperial systems. Before 1959, slightly different national foot values caused conversion discrepancies in surveying and engineering.
Is there a difference between the international foot and the US survey foot?
Yes. The international foot = exactly 0.3048 m. The US survey foot = 1200/3937 m β‰ˆ 0.30480060960... m β€” a difference of about 0.6 mm per mile. NIST formally retired the US survey foot on January 1, 2023 (NIST SP 1297, 2022 update). All modern conversions should use the international foot.
How many meters is 6 feet?
6 feet = 6 Γ— 0.3048 = 1.8288 meters exactly. This is the reverse of the standard conversion: multiply feet by 0.3048 (exact) to get meters.
How accurate is the 3.28 shortcut?
Using 3.28 instead of 3.280839895 introduces an error of 0.000839895 ft per meter β€” about 0.256 mm/m, or 0.027%. Over 100 m, that is 2.56 cm. For casual measurements this is negligible; for engineering, surveying, or sports timing it is not acceptable.

Meters to Feet glossary

Meter (metre)
The SI base unit of length, defined since 2019 by fixing the speed of light c = 299,792,458 m/s exactly. Symbol: m.
Also called: metre Β· SI base unit of length
Foot
A unit of length in the US customary and imperial systems, defined as exactly 0.3048 meters by international agreement in 1959. Symbol: ft.
Also called: international foot Β· ft
International foot
The foot as redefined in 1959 by the United States, United Kingdom, Australia, Canada, New Zealand, and South Africa to be exactly 0.3048 m β€” distinguishing it from the older US survey foot (0.3048006 m), which was retired in 2023.
Also called: imperial foot
NIST SP 811
NIST Special Publication 811 β€” Guide for the Use of the International System of Units (SI). Published by the US National Institute of Standards and Technology; the authoritative US reference for unit conversion factors.
Also called: NIST Special Publication 811
SI (Système International)
The International System of Units β€” the modern metric system adopted by the BIPM and used by all major metrology bodies worldwide. Defines the meter, kilogram, second, and other base units.
Also called: metric system Β· SI units
Conversion factor
A multiplicative constant that converts a quantity expressed in one unit to another unit. For meters to feet, the exact factor is 1 / 0.3048 = 3.280839895013123... (non-terminating).
Also called: unit factor Β· dimensional factor

How we built this calculator

Methodology

The converter multiplies your meter value by the exact reciprocal of 0.3048. Because the foot is defined as 0.3048 m exactly (not approximately), the conversion factor in the meters-to-feet direction is irrational in the sense that 1 / 0.3048 is a non-terminating decimal: 3.280839895013123...

Formula source
International foot definition: 1 ft = 0.3048 m exactly (NIST SP 811, 2008 edition, Appendix B, Table B.6)
Last updated
2026-04-23
Calculation runs
Client-side only
NC
WRITTEN BY
Numora Conversion Team
NE
PUBLISHED BY
Numora Editorial Team

Reviewed on 2026-04-23 Β· Next review: 2027-04-23

See editorial policy

Sources & references

Every numeric assumption traces to a primary source.

  1. NIST SP 811 (2008) β€” Guide for the Use of the International System of Units, Appendix B, Table B.6: Conversion factors for lengthUSA
  2. BIPM SI Brochure, 9th edition (2019) β€” The International System of UnitsINT
  3. NIST β€” Metric Program: Retirement of the US Survey Foot (effective January 1, 2023)USA
  4. ISO 80000-1:2022 β€” Quantities and units β€” Part 1: GeneralINT
  5. Numora Editorial Policy. numora.net/editorial-policy