Millimeters to Feet Converter: Convert MM to FT with Exact Factor
Convert millimeters to feet instantly using the exact NIST-defined factor: 1 foot = 304.8 mm exactly
Try the calculator
Math runs in your browser. No sign-up.
Fill in the millimeters to see your result.
This converter uses the exact international definition: 1 international foot = 304.8 millimeters (exact), as defined by the International Yard and Pound Agreement (1959) and documented in NIST SP 811.
To convert millimeters to feet, divide by 304.8 β the exact, defined value of one international foot in millimeters, established by the 1959 International Yard and Pound Agreement and published in NIST SP 811. For 1,000 mm, the result is 3.280840 ft. The factor 304.8 is exact and carries no rounding error; any imprecision comes only from displaying finite decimal places.
**Divide any millimeter value by exactly 304.8 to get feet β the factor is an international definition, not a rounded approximation.** One foot equals 304.8 mm by agreement between the US, UK, Canada, Australia, and other nations since 1959. So 1,000 mm = 3.280840 ft; 1,800 mm = 5.905512 ft. The only source of rounding error is how many decimal places you choose to display, not the conversion factor itself.
What is a millimeters to feet?
Millimeters and feet are connected by an exact, legally defined factor: 1 foot = 304.8 mm, with no rounding. This definition comes from the 1959 International Yard and Pound Agreement and is documented in NIST Special Publication 811. Enter any millimeter value above and get the equivalent in decimal feet, feet and inches, and total inches. Common uses include converting architectural drawings, metric height measurements, and manufacturing dimensions between SI and US customary systems. Reviewed against NIST SP 811 (Table B.8) and the BIPM SI Brochure (9th edition, 2019).
The formula
- ft β length in feet (international foot)
- mm β length in millimeters
- 304.8 β exact number of millimeters per international foot (1959 agreement, NIST SP 811)
Source: International foot definition: 1 ft = 304.8 mm exactly (International Yard and Pound Agreement, 1959), documented in NIST SP 811 (2008, reprinted 2019), Table B.8.
Worked examples
1Converting 1,000 mm to feet (one meter)
Start with 1,000 mm, which equals exactly 1 meter by definition. Apply the NIST-defined factor: ft = 1000 Γ· 304.8 = 3.280840 ft (to 6 decimal places). The full repeating decimal is 3.28084(098425196850393700787...) but rounds to 3.280840 ft for practical purposes. Breaking it down: 3 whole feet remain, and 0.280840 Γ 12 = 3.370 inches remain. So 1,000 mm = 3 ft 3.370 in. This is the most commonly needed conversion β one meter is very close to 3 feet 3β inches.
2Converting 304.8 mm to feet (the definitional anchor)
This is the anchor case that proves the formula: 304.8 mm Γ· 304.8 = 1.000000 ft exactly. Per the International Yard and Pound Agreement of 1959 β documented in NIST SP 811 and the BIPM SI Brochure β one international foot is defined as exactly 304.8 millimeters. There is no rounding in this relationship; it is a legal definition. Any converter that returns anything other than exactly 1.000000 ft for 304.8 mm is using a rounded or non-standard factor.
3Converting 1,828.8 mm to feet (average adult male height)
1,828.8 mm is exactly 6 feet, verifiable because 6 Γ 304.8 = 1,828.8 exactly. Applying the formula: 1828.8 Γ· 304.8 = 6.000000 ft. This is a useful sanity check for anyone converting human height measurements β a person described as '6 foot 0' in US records should appear as exactly 1,828.8 mm in a metric medical record. The whole feet = 6, remainder = 0 inches exactly. This is the most common real-world use case for mm-to-feet conversions in medical, sports, and ergonomic contexts.
How to use this calculator
- Millimeters β Enter the length in millimeters you want to convert to feet. For example, a 6-foot person is 1828.8 mm tall.
- Read the result. Use the worked examples below to sanity-check against a known scenario.
What your result means and what to do next
Common mistakes and edge cases
Using 30.48 cm Instead of 304.8 mm
The most common error is confusing the per-centimeter conversion (1 ft = 30.48 cm) with the per-millimeter factor (1 ft = 304.8 mm). Dividing 1,000 mm by 30.48 instead of 304.8 gives 32.808 β a result 10Γ too large. The check is simple: 304.8 mm should give exactly 1 foot. If your answer for 304.8 mm is not 1.000000 ft, the wrong factor is in use.
Rounding the Factor to 305 mm
Some quick-reference charts approximate 1 ft β 305 mm for mental arithmetic. For casual purposes this is fine (error β 0.065%), but in engineering drawings, medical records, or any context where millimeter precision matters, the error compounds. A 10-meter structural span calculated at 305 mm/ft comes out 32.787 ft instead of the correct 32.808 ft β a 6.4 mm discrepancy that can exceed fabrication tolerances.
Confusing the International Foot with the US Survey Foot
Until NIST formally deprecated it in 2023 (Federal Register notice, October 2023), US surveyors used a slightly longer 'survey foot' of 1200/3937 m β 304.8006 mm. Converting large survey distances with the wrong foot introduces systematic error of about 2 parts per million β small per foot, but meaningful over miles. All modern work should use the international foot (304.8 mm exactly).
Treating Feet and Inches as a Decimal System
Feet and inches are not decimalized: 5.5 ft is 5 feet 6 inches, not 5 feet 5 inches. Many conversion errors come from reading a decimal foot result and treating the decimal portion as inches. Always multiply the decimal portion by 12 to get the inch remainder. This converter does that step automatically and shows both representations.
How small changes affect your result
Because mm-to-feet is a linear conversion (no exponents or compounding), sensitivity is constant: every additional 304.8 mm adds exactly 1 foot to the result, and every 25.4 mm adds exactly 1 inch.
Common length conversions: mm to feet for reference lengths
| Length (mm) | Feet (decimal) | Feet & inches | Meters |
|---|---|---|---|
| 1 mm | 0.003281 ft | 0 ft 0.039 in | 0.001 m |
| 25.4 mm | 0.083333 ft | 0 ft 1.000 in | 0.0254 m |
| 100 mm | 0.328084 ft | 0 ft 3.937 in | 0.100 m |
| 304.8 mm | 1.000000 ft | 1 ft 0.000 in | 0.3048 m |
| 500 mm | 1.640420 ft | 1 ft 7.685 in | 0.500 m |
| 914.4 mm | 3.000000 ft | 3 ft 0.000 in | 0.9144 m |
| 1,000 mm | 3.280840 ft | 3 ft 3.370 in | 1.000 m |
| 1,524 mm | 5.000000 ft | 5 ft 0.000 in | 1.524 m |
| 1,828.8 mm | 6.000000 ft | 6 ft 0.000 in | 1.8288 m |
| 2,000 mm | 6.561680 ft | 6 ft 6.740 in | 2.000 m |
| 3,048 mm | 10.000000 ft | 10 ft 0.000 in | 3.048 m |
| 10,000 mm | 32.808399 ft | 32 ft 9.701 in | 10.000 m |
All exact anchor values (25.4 mm, 304.8 mm, 914.4 mm, 1524 mm, 1828.8 mm, 3048 mm) return whole-number feet or inches because they derive from the same 1959 international definition.
Frequently asked questions
How many millimeters are in a foot?
What is the exact conversion factor from mm to feet?
Is 1 foot 304.8 mm or 304.79 mm?
How do I convert mm to feet and inches?
What is 1800 mm in feet?
What is 1000 mm in feet?
Is the US survey foot different from the international foot?
How do I convert feet back to millimeters?
Millimeters to Feet glossary
How we built this calculator
Methodology
Every mm-to-feet conversion uses a single division: feet = millimeters Γ· 304.8. The factor 304.8 is not a rounded approximation β it is the exact, legally defined number of millimeters in one international foot, established by the 1959 International Yard and Pound Agreement and codified in NIST Special Publication 811 (Table B.8).
Sources & references
Every numeric assumption traces to a primary source.
- NIST SP 811 (2008, reprinted 2019) β Guide for the Use of the International System of Units, Table B.8 (foot = 3.048 Γ 10β»ΒΉ m exactly)USA
- BIPM SI Brochure, 9th edition (2019) β The International System of UnitsINT
- NIST β Metric Program: Unit of Length (Foot deprecation notice, Federal Register 2023)USA
- ISO 80000-1:2022 β Quantities and units, Part 1: General (SI unit definitions)INT
- NIST Handbook 44 (2026 edition) β Appendix C: General Tables of Units of MeasurementUSA
- Numora Editorial Policy. numora.net/editorial-policy